Phoenix Rack & Axle
-> Vendor/dealership Reviews

#1: Phoenix Rack & Axle Author: calichaos PostPosted: Fri Dec 30, 2016 6:28 pm
    ----
Phoenix Rack and Axle
114 N 32nd St
Phoenix, AZ 85034
+1-602-252-8255

no real website.. so here have a YELP page
www.yelp.com/biz/phoen...le-phoenix

Recently had to take my driveshaft to these folks after my front u-joint decided to fail and take a chunk of the output side mounting assembly (no clue what the thing is called).



Anyways I called the local dealership and found out the only driveshaft parts Toyota sells is the u-joints and the entire driveshaft assembly. So they recommended I give Phoenix Rack & Axle a call as that is where they send all their axle related repairs.

I took the driveshaft and new u-joints to them at 3:30 and it was ready for 11am the next day. Great people to deal with and they DEFINITELY know their stuff. They also do steering rack repairs / sales as well as anything driveline related that is NOT the transmission. This shop also has a full service side of the house with VERY reasonable rates.

Anyways the shop is very offroad community friendly and just all around good folks and I would recommend.

#2: Re: Phoenix Rack & Axle Author: JustinD PostPosted: Mon Jan 02, 2017 9:36 am
    ----
I have a rebuilt steering rack from them in my FJ. My inner tie rods were shot and there was water in the power steering fluid. Rusted the whole rack out. Everything has been fine since the replacement.

#3: Re: Phoenix Rack & Axle Author: calichaos PostPosted: Wed Jan 04, 2017 6:48 am
    ----
just a heads up.. if you need CV axle shafts they will refurb yours for about 50 a side AND then give you a lifetime warranty!

down side: either you leave the truck with them (additional labor for take off / back on) OR wait a day for the refurb process.

but it could beat spending $80 a side at the local parts seller

www.oreillyauto.com/si...&ppt=C0362

#4: Re: Phoenix Rack & Axle Author: JimbolioLocation: Tucson PostPosted: Wed Jan 04, 2017 7:30 am
    ----
I can get two new shafts for $130. and replace them in about 2 hours.

www.oreillyauto.com/si...vi=1441491

#5: Re: Phoenix Rack & Axle Author: vaportrailLocation: Morristown, AZ PostPosted: Wed Aug 15, 2018 11:17 am
    ----
The stealership wants $800 a side, to replace a cv shaft...

$374.37 per shaft
$450 + or - labor per side

#6: Re: Phoenix Rack & Axle Author: calichaos PostPosted: Thu Nov 01, 2018 11:26 am
    ----
called today 11/1/2018 Phoenix Rack & Axle now wants $99 to rebuild your CV axles for the FJ. Yikes!

they do have some in stock.. but so does Oreilly's and they are a LOT closer (everywhere)

#7: Re: Phoenix Rack & Axle Author: BucketBoyLocation: North Phoenix/Flagstaff PostPosted: Wed Nov 07, 2018 9:48 am
    ----
calichaos wrote:
called today 11/1/2018 Phoenix Rack & Axle now wants $99 to rebuild your CV axles for the FJ. Yikes!

they do have some in stock.. but so does Oreilly's and they are a LOT closer (everywhere)

Should be kept in consideration that the ones from Phoenix Rack are likely rebuilt OEM's not imported parts from china. They built me a killer pair of custom CV's (Long Travel boots to they don't tear as well as 3.5" over stock chromoly shafts).



-> Vendor/dealership Reviews

All times are GMT - 7 Hours

Page 1 of 1